Cage Project

I know it's not the best sketch but I think this is the general plan I am going to go with for my first cage. It's going to be built for a ball python. I might start a little breeding project with them. I left it pretty low, so I can build just the tank portion for a 2nd tank and just place it on top.

Once I figure some more things on it, I will post them up here.

Misting System and Cage Ideas

I have been pretty damn busy lately and haven't been able to work on my styrofoam test, or anything else at that.  Anyway, I just received permission to post this videos to give you a couple idea of a homemade cage and a awesome idea for a misting system.

These videos are property of Dustin (Cherokeekid304) on youtube.com
Be sure to check out his videos and don't forget to subscribe.

10 Gallon Styrofoam Build- Day 1

Alright, so today I got some supplies to start building my own rock wall using the styrofoam method. Since this one is more of a test, I am making it for a 10 gallon tank. The humidity has been horrible around here lately so I decided to do this inside. I decided to pick up a styrofoam cutter from Hobby Lobby to cut down on the mess. Everything you see in the photo came out to about $25.

Here's a shot of the cutter. It's nothing special, just a little needle that heats up.
This will hold me over until I decide which heat knife I'm going to order.

First thing I did was mark out how big of an area I was going to work with and glue two 1/2" sheets together to build off of.

I didn't think out a design or anything before starting this so I just kinda sketched out something real quick, just to work as a guide to build on top of.

I started to carve out "rock" shapes from a third sheet to add to the double layered backing.

Here's a pic of what I ended with tonight. The fumes from cutting the styrofoam isn't the greatest. I didn't have a mask, only a bandanna tied around my face. Anyway I hope it looks good in the end. This is just the back. I think I might make sides to close everything in. We'll see how this goes. 

Rock Landscapes

Alright, I just got the thumbs up from Andy at Lizard Landscapes to post these how-to videos. First chance you get, hop on over to Andy's site and check it out. I will start my own rock-scape soon and will post my progress on here. Enjoy the videos and don't forget to head over to www.lizard-landscapes.com

Thanks again to Andy @ Lizard-Landscapes

Crested Gecko Build

I found a great source for a few videos I would like to add here about building fake rock decor for your reps, but I am still waiting to hear back from the owner to make sure they won't get mad if I post it up here. 

Anyway, I have found a nice how to on making a natural looking crested setup.

All the credit for this one goes to Jay Morrow "jabba1967" @ www.reptileforums.co.uk/

Clamps ~ the resident, Photo by Lotte aka saedcantas on R.F.U.K.

This is my crestie viv build. There have been a few posts recently with people wanting to know how to build more natural looking planted vivs for tropical species, although the plants in this viv aren’t strictly the plants that would be found in a crestie’s natural environment, the main reason for this is that this was built for Pumilios, but as we live in Jersey, and are at the mercy of the local reptile shop, (which is crap), this never happened. The viv was built and stayed empty for a year before I spotted an add for cresties in the classifieds, and thought, hello, I might have a home for one of you. 

So although the plants aren’t strictly correct, they do look the part. The other thing to consider is what will survive.

So this is what we, (me and my o/h)  (O/H = OTHER HALF), had to work with, as this was my first viv build, there were a few things I didn't think of when I built it, so I will let you know what I would do differently when I come to those bits.

It’s a 24”x12”x24” fish tank that a mate gave me, the only real problem with it is that as it’s so tall, and the only way in is via the top, it is difficult to reach the floor. 

So here it is laid on it's back with various bits and bobs laid out. What I would have done differently is to cover the back in silicon as opposed to spraying the expanding foam straight onto the glass.

Another thing to think about when applying the foam is how hard you pull the trigger, if you pull it in too far the foam has more air in it, this will make it expand more, which can make the back look a little unnatural. If you only pull the trigger in a little, this will make the foam more compact, although this means a can won’t cover so much.

You can see how we changed our technique in this pic, bottom left is how we started, and then as we moved up, we made the foam more dense, we needed two and a half 750ml cans to cover it. What you might also want to do is use a gloved hand to mould the foam as it drys

This is the foam complete, the thermometer is sitting on a cave that I had built as a hide, but obviously the crestie wont use it.

In this pic I am testing out the lighting and heating.   

Ok, where were we?

Oh yeah, the fun bit...Not! The siliconing of the back.

This is the bit I hate with viv builds like this, it's messy, it's smelly, and it seems to take forever, I only gave it the one coat, but I have heard of people giving it two coats, I'm not sure if this is strictly necessary, but I supose it wouldn't hurt if you have the discipline.

However I do like putting on the eco earth, there is a "job satisfaction" to it, after all the "unnatural" expanding foam, and then the silicon, It's at this point that you can see a viv taking shape!

On this build I made the eco earth too wet, and didn't give it enough time to dry out, to be honest I thought it had to go on fairly wet, but now when I make a batch of eco earth, I use very little water, and then leave it for a week, this means it should be almost completely dry. On this build I put the earth on and brushed off the loose earth almost straight away, now though I tend to throw on handfuls of earth, and then leave it over night, more stays on this way I have found. 

The last thing to do is clean off all the silicon that is on the glass.

Ok, I was going to start with the lights heat and ventilation tonight, but I've changed my mind. Now now, It's my viv build thread, I can do what I like 

So instead we will look into some plants, most of which will die, DOH! 

So the first thing to do is put in the Leca, about an inch, this is why I put a 2" line of silicon at the bottom of the viv to hide this from view , next to go down was a layer of weed netting, and then finally the eco earth, (about an inch).

So here you can see some plants, and moss, everything died except the brom up on the right, 

If anyone knows how to grow moss I would love to know the secret, as I have tried in two vivs now, and I can't get it to last more than a couple of weeks.

So in went more broms, they are still all alive and kicking 18 months later .

Heat/lights/ventilation, lets start with the heat. the only source of heat for the viv are four 20watt halogen lights. In the beginning I fitted two of these lights, but the first winter in my flat told me that this wasn't going to be enough, I was going to put heating cable in, but I was told it wouldn't be needed as "room temps" would be fine, however the person giving this advice (my girlfriend, the person helping me with this build) hadn't spent a winter in my flat to see just how cold it gets. 

So here it is when it had two lights;

With hindsight I would have fitted the heat cable, as I always say, "It's better to have something and not need it, than to need it and not have it". I fitted heat cable to another viv I built, and the cable on it's own was able to get the temps up into the 80f range with no extra heating, plus as the heat is coming through the wet eco earth, this brings up the humidity nicely .

But as it would have been a major pain to retro fit the heat cable, I put in two extra lights instead. This, along with the exta vivs we now have in the lounge, means that I can get a good 78f in the viv, even in the winter;

Next, lighting, apart from the four halogens, there is a 10% repti sun tube with reflector for uvb. I will be upgrading this soon by fitting a 15" 2% tube in-between the two fans. I'll post pics when it's done.

Now obviously we don't want cresties getting up into the lighting, so I fitted a screen, I used net curtains as this viv was going to house frogs, and the normal netting you can get from the reptile shops lets the small flys you feed frogs with through 
And as net curtains only blocks about half the uv, and ALL flies, then this is what we went for.

I glued the netting to a plastic frame I made, and this sits nicely on the glass shelf that runs around the top of the tank. As Clamps (the crestie) likes to sleep at the top of the viv, I tied some fake leaves to the underside of the netting to a, block all uvb, and b, block some of the light;

Although she will mostly sleep in the corner with the leaves, she will also sleep in the opposite corner.

Now the ventilation, I fitted two computer fans, one sucks, one blows (fnaah). The vents do a number of jobs, one, they circulate the air, pulling out stale air and replacing it with fresh. Two, they help circulate the heat. Three, they prevent the glass from misting up.

To get the air in and out, I drilled holes in the lid. The fans were then screwed to the underside of the lid.

I put this in for the benifit of the crestie, but I didn't know that it would be the broms that would appreciate it more, they had gone a dull green, but within a week of the light being in the colour is coming back.

You can see the pink in the centre of the plant has come back, this had all but gone. We had some more colourful broms in here befor, but they died, now I have this tube in I might get some more and try again

So this is where it all begins....

So, not too long ago I came across a company called Cages by Design. After learning how much they were selling for, I instantly thought of building my own. Now I know they will not come out as nice as theirs, but it was worth a shot. I might end up surprising myself in the end. I have always liked building things by my own design and just making things different than what you might see in the stores. There are many sites out there with info on how to contruct your own cages, tanks, aquariums, backgrounds, and so on. My goal for this site, is not only to post my progress with anything I build, but to also share other ideas and tutorials people have come up along to way. In the end, I am hoping this site will be a good place for "Do it yourselfers" to come and research and figure out exactly how to do what it is they want to do. For anybody who does attempt what is seen on this blog, want to share their experience, please email me and I would love to post it.

It might take me a little while to really start this up. I am in the progress and getting some extra tools and stocking up on random items I come across at the jobsite. In the mean time, I will start compiling sources and contacting people for permission to post their ideas on this site.

Please check back soon!!